
Tow and Farm is a wholly owned subsidiary of Metalform, established by the Easton family in 1961 and remains a family owned business. Tow and Farm provides total pasture management solutions, whether you are a dairy farmer, hobby farmer or contractor. Tow and Farm offer succinct time and financial benefits that our sales reps can work through with you to develop accurate ROI's. Talk to us today!
Easton Street Dannevirke 4930
New Zealand
Email: sales@towandfarm.co.nz
FreePhone: 0800 337 747
Fax: +64 6 374 9316
The Twin Series features the wheels positioned on the side of the Tow and Mow, where the Hort Series has them positioned behind.
$4,690.00 +GST
The Tow and Mow Twin series is more suitable for undulating, rough grounds and all-terrain topping. This is because the wheels are in line with the engines which reduce potential ground scalping when cutting low. Top your paddocks at up to 15 km/hr (9 mph) with the Tow and Mow – this means you can cover up to 1 hectare (2.5 acres) in just 35 minutes with the 1270 model. Easily adjust the cutting height from 30mm (1.25”) up to 180mm (7”) by just winding a handle at the rear of the machine. No locking pins or heavy adjustment required, just wind it up for travelling between jobs and then back into position for mowing.


The Tow and Mow series uses a ‘direct drive’ system, eliminating the need for expensive clutches, belts and other unnecessary parts that are require costly maintenance. And it’s speedy – just attach the Tow and Mow to your ATV, 4 wheeler, truck or other stable vehicle using the standard ball and hitch coupling system and tow it to the area that needs to be cut. Once there, you can mow at speeds of up to 15 km/hr (9 mph).


Our patented bearing system supports the direct drive engine, meaning there’s no loss of power or slippage that can occur with typical belt and pulley systems. And the motors are protected from any shocks, resulting from sudden stops.
This has eliminated the need for belts and pulleys on a single engine setup. Very few parts result in a very simple solution.
Even if the grass is knee height, the Tow and Mow is designed to handle this but you may need to travel slower. It depends on how dense your pasture is.

The engines are offset which means they have a cutting overlap of 25mm (1 inch) ensuring there is no belts or timing necessary! Simple!
Construction is 4mm thick, high grade steel which is zinc sprayed and then powdercoated.
| cut width | 1270mm (50 inches) |
|---|---|
| engine model | 2 x Briggs and Stratton – 850 Series |
| engine horsepower | 2 x 6hp = 12hp |
| height adjustment | 30mm – 180mm (1.25" – 7") |
| size assembled | 2250mm (D) x 1740mm (W) x 600mm (H) |
| size crated | 1380mm (D) x 1830mm (W) x 750mm (H) |
| weight uncrated | 165 kg (365 lbs) |
| weight crated | 215 kg (475 lbs) |
| jockey wheel | Optional |
| electric key start | N/A |
| tow hitch | 50mm Coupling |
You must be logged in to post a review.
Julia Dodds –
Great product and easy to start and use.